Skip to content

Satellite TV Guides

  • Home
  • Satellite Dish Installation
  • LNB Technology & Troubleshooting
  • Satellite TV Troubleshooting
  • Satellite Technology & Standards
  • Satellite Software & Configuration
Satellite TV Guides
  • Geostationary Orbit: How Satellites Stay Fixed in the Sky
    Satellite Technology & Standards

    Geostationary Orbit: How Satellites Stay Fixed in the Sky

    Byadmin September 30, 2026September 30, 2026

    Look at any row of satellite dishes on a skyline and they all point to the same patch of sky. That is because the satellites they watch hover in a special orbit — the geostationary arc — and never seem to move. What Is a Geostationary Orbit? A satellite about 35,786 km above the equator,…

    Read More Geostationary Orbit: How Satellites Stay Fixed in the SkyContinue

  • Polarization: Horizontal vs Vertical and Circular Satellite Signals
    Satellite Technology & Standards

    Polarization: Horizontal vs Vertical and Circular Satellite Signals

    Byadmin September 30, 2026September 30, 2026

    Satellite signals are polarised — the radio wave oscillates in a specific orientation. European satellites use linear horizontal/vertical polarisation; American ones often use circular. This is why your LNB has to be rotated. Why Polarisation Exists Two signals can share the same frequency if they are polarised differently. A horizontal channel and a vertical channel…

    Read More Polarization: Horizontal vs Vertical and Circular Satellite SignalsContinue

  • FEC in Satellite Reception: Forward Error Correction Explained
    Satellite Technology & Standards

    FEC in Satellite Reception: Forward Error Correction Explained

    Byadmin September 30, 2026September 30, 2026

    FEC stands for Forward Error Correction, and it is the reason digital satellite works at all. Without it, every speck of noise would ruin the picture. Here is how it helps you. The Problem FEC Solves The satellite signal arrives weak and noisy. Some bits will inevitably be corrupted by the time they reach your…

    Read More FEC in Satellite Reception: Forward Error Correction ExplainedContinue

  • Bitrate and Symbol Rate in Digital Satellite TV
    Satellite Technology & Standards

    Bitrate and Symbol Rate in Digital Satellite TV

    Byadmin September 30, 2026September 30, 2026

    Two numbers appear on every satellite transponder: bitrate and symbol rate. They are related but different, and understanding them helps you make sense of picture quality and channel capacity. Symbol Rate The symbol rate (measured in megasymbols per second, MS/s) is how fast the transponder changes its signal. A common European value is 27500 MS/s….

    Read More Bitrate and Symbol Rate in Digital Satellite TVContinue

  • EIRP Explained: Satellite Signal Strength on Earth
    Satellite Technology & Standards

    EIRP Explained: Satellite Signal Strength on Earth

    Byadmin September 30, 2026September 30, 2026

    EIRP sounds like jargon, but it is the single number that tells you how big a dish you need. Short for Effective Isotropic Radiated Power, it describes how strong the satellite's signal is where you live. What EIRP Means EIRP combines the satellite's transmit power and the size of its broadcast antenna into one effective…

    Read More EIRP Explained: Satellite Signal Strength on EarthContinue

  • What Is a Transponder? Satellite Frequency Channels Explained
    Satellite Technology & Standards

    What Is a Transponder? Satellite Frequency Channels Explained

    Byadmin September 30, 2026September 30, 2026

    A satellite does not broadcast “channels” in the way a TV station does. It broadcasts transponders — blocks of frequency that carry many channels at once. Understanding transponders explains how a single satellite carries hundreds of stations. What Is a Transponder? Short for “transmitter-responder”, a transponder is a channel on the satellite that receives an…

    Read More What Is a Transponder? Satellite Frequency Channels ExplainedContinue

  • 8PSK and QPSK Modulation in Satellite TV: A Plain-Language Guide
    Satellite Technology & Standards

    8PSK and QPSK Modulation in Satellite TV: A Plain-Language Guide

    Byadmin September 30, 2026September 30, 2026

    When you inspect a satellite channel's signal details, you will see “QPSK” or “8PSK”. These are modulation schemes — the way bits are encoded on the carrier. They explain why some channels need a cleaner signal than others. What Is Modulation? To send digital data over a radio wave, you vary something about the carrier…

    Read More 8PSK and QPSK Modulation in Satellite TV: A Plain-Language GuideContinue

  • Understanding Ku Band vs Ka Band Satellite Frequencies
    Satellite Technology & Standards

    Understanding Ku Band vs Ka Band Satellite Frequencies

    Byadmin September 30, 2026September 30, 2026

    Satellites broadcast at different microwave frequency bands. The two you will meet as a home viewer are Ku band and Ka band. They have different properties — and the choice affects dish size, weather sensitivity and the channels you can receive. Ku Band (10.7–12.75 GHz) The workhorse of home satellite TV. European consumer satellites (Astra,…

    Read More Understanding Ku Band vs Ka Band Satellite FrequenciesContinue

  • DVB-S vs DVB-S2 vs DVB-S2X: The Standards Explained
    Satellite Technology & Standards

    DVB-S vs DVB-S2 vs DVB-S2X: The Standards Explained

    Byadmin September 30, 2026September 30, 2026

    When you look at a receiver's specs you will see DVB-S, DVB-S2 and DVB-S2X. These are the three broadcast standards that have shaped satellite TV over the last three decades. Knowing the difference explains why some channels need a newer receiver. DVB-S: The Original (1995) The first digital satellite standard. Uses QPSK modulation and a…

    Read More DVB-S vs DVB-S2 vs DVB-S2X: The Standards ExplainedContinue

  • Digital Predistortion: What It Is and Why It Matters in Satellite Communications
    Satellite Technology & Standards

    Digital Predistortion: What It Is and Why It Matters in Satellite Communications

    Byadmin September 30, 2026September 30, 2026

    Digital predistortion (DPD) is one of the invisible technologies that modern satellite — and 5G — depend on. If you have heard the term but are not quite sure what it does, this plain-language introduction is for you. The Problem DPD Solves To broadcast, a satellite ground station amplifies the signal to huge power before…

    Read More Digital Predistortion: What It Is and Why It Matters in Satellite CommunicationsContinue

Page navigation

Previous PagePrevious 1 … 3 4 5 6 7 … 12 Next PageNext

© 2026 Satellite TV Guides | About Us | Contact | Privacy Policy | Disclaimer

  • Home
  • Satellite Dish Installation
  • LNB Technology & Troubleshooting
  • Satellite TV Troubleshooting
  • Satellite Technology & Standards
  • Satellite Software & Configuration