Signal source
SAT>IP converts satellite DVB-S2 signals into IP streams that can be distributed over a home network. DVB-T2 receives terrestrial television broadcasts through an antenna. DVB-S2 receives direct satellite signals through a dish and LNB.
Coverage and channel availability
DVB-T2 coverage depends on proximity to terrestrial broadcast towers and works best in urban areas. DVB-S2 requires a clear view of the satellite orbital position and works wherever a dish can be installed. SAT>IP extends satellite reception to network-connected devices without additional cabling.
Equipment cost
DVB-T2 requires an antenna and a T2 receiver or PC tuner. DVB-S2 requires a dish, LNB, and compatible tuner. SAT>IP requires a SAT>IP server device in addition to the satellite hardware, which adds to the total cost.
Setup complexity
DVB-T2 is the simplest to set up with a small indoor antenna. DVB-S2 requires dish alignment and cable routing. SAT>IP adds network configuration and device discovery to the standard satellite setup.
Picture quality
All three technologies support HD and 4K broadcasts when the tuner and display support it. DVB-S2 offers the broadest international channel selection through direct satellite reception. DVB-T2 coverage is limited to locally broadcast channels.